Uniden Guardian App Cam Solo Owner's Manual

Uniden Guardian App Cam Solo Owner's Manual

Battery powered camera

Advertisement

Uniden
App Cam Solo
Battery Powered Camera
For more exciting new products please visit our website:
Australia: www.uniden.com.au
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for Uniden Guardian App Cam Solo

  • Page 1 Uniden App Cam Solo Battery Powered Camera For more exciting new products please visit our website: Australia: www.uniden.com.au OWNER’S MANUAL...
  • Page 2: Important Safety Instructions

    Disconnect the power adaptor during long periods between usage. • Use only the accessories and power adaptors supplied by Uniden. • WIRELESS DEVICES OPERATING RANGE Ensure the signal reception is acceptable between the camera(s) and the WiFi router.
  • Page 3: Table Of Contents

    OVERVIEW ..................... 4 WHAT’S IN THE BOX? ................... 5 GETTING TO KNOW YOUR CAMERA ............6 INSTALLING THE BATTERY ................. 7 INSTALL UNIDEN SOLO APP..............7 DEVICE MANAGEMENT................10 PLACING THE CAMERA ................17 QUICK ACCESS ICONS ................19 LIVEVIEW/PLAYBACK ................22 LIVEVIEW ....................
  • Page 4: Overview

    Offering a 130-degree viewing angle, which provides a greater field of vision, the Guardian App Cam Solo can be fitted to any flat surface with an easy-to install magnetic base. Also included is an optional screw base for those more easy-to-reach areas, such as the front door.
  • Page 5: What's In The Box

    Twin Pack includes 2 single packs of AppCam Solo. Quad Pack includes 4 single packs of AppCam Solo. Need Help? Get answers at our website: www.uniden.com.au for Australian model If any item is missing or damaged, contact your place of purchase immediately.
  • Page 6: Getting To Know Your Camera

    Standby Status: The camera is in the power-saving mode; there is no live view or motion recording. Working Status : The camera is running at full capacity. It enters the working status when someone is accessing the camera via Uniden Solo App or the PIR motion sensor detects a movement. LED Status...
  • Page 7: Installing The Battery

    INSTALLING THE BATTERY Insert the Batteries into the Camera Step 2 Step 2 Step 1 Insert four batteries Close the back cas- Please use the stick to press the white button, into the battery slot. ing. Please press both end of the cas- and then rotate to sepa- rate the backing casing ing to make it close...
  • Page 8: Install Uniden Solo App

    8.0 or higher. Android devices: Android 3.0 or higher. Install the App 1. Search “Uniden Solo” in App Store or Google Play, download and install the app. 2. After successfully installed it, tap the icon to launch the Uniden Solo App.
  • Page 9 User Interface : More Option , tap this icon to show more configuration icons. : Help , tap to read the tips regarding camera usage and installation. : Share the QR code, tap this icon to get the QR code/UID of the camera. : Edit Device , tap this icon to edit the login parameters of the camera.
  • Page 10: Device Management

    Device Management This part will introduce how to add new device, modify the device information and modify device login password etc. Add New Device You can add the camera by scanning QR code (on camera’s back) or manually entering camera UID (below QR code). 1.
  • Page 11 Option 2: Manually Enter the UID down on the bottom to type in information. Enter the UID of the camera in the UID field, tap “ Done ” on top right to save the settings. 3. To configure the camera for the first time, tap to “ Set Up Camera ” and follow the instruction to continue.
  • Page 12 4. Enter the login password of the camera, if there is no password yet, leave it blank, then tap the “ Login ” button on the bottom to login the camera. 5. The camera has no password by default, but the camera will require you to create a new password for security reason.
  • Page 13 6. To read the tips, slide the page to go through, or tap the “ Skip ” button on top right to skip these tips.
  • Page 14 Edit the Device Information To modify the login information of your camera, follow the steps below: 1. Tap and choose on the screen. 2. You can change the device name in the field, then enter the login username and password. Tap “Save”...
  • Page 15 Modify Camera Login Password To change the login password, follow the steps below: Steps : 1. Go to “Device Settings” > “Password” > “Account Security” > “ Password ”. 2. Enter the old password, then type in the new password and confirm, tap “ Modify Password ”...
  • Page 16: Reset Camera

    Delete Device On the Devices Page, tap and choose to delete camera from the list. Reset Camera To rest the camera, use the provided reset needle to hold the reset button for 5 seconds. A voice prompt “ factory resets succeeds ” indicates the camera has been reset successfully.
  • Page 17: Placing The Camera

    Uniden Solo Placement Know Camera’s Field of View The field of view of Uniden Solo is 130° diagonally. Please make sure the monitoring area is well within its field of view. The ideal viewing distance is 2 to 10 meters, which enables you to recognize a human.
  • Page 18 Understand the Detecting Field of the PIR Motion Sensor The PIR motion sensor is more sensitive to side-to-side movement than movement heading straight toward the camera or away from the detection area of the PIR motion sensor. For example, when a person moves straight toward the camera, the PIR motion sensor will be less sensitive to the movement.
  • Page 19: Quick Access Icons

    Push Notification is enabled while means not enabled. Note: You need to allow Uniden Solo App to send you notifications on your device. Go to “Settings” > “ Notifications ” on your smartphone, and then click Uniden Solo App to allow notifications.
  • Page 20 Wi-Fi Settings To set up the camera for the first time, follow the voice prompt to configure. If you want to modify the WiFi settings of the camera, please follow the steps below: 1. Tap to enter the “ Wi-Fi Settings ” page. 2.
  • Page 21: Device Settings

    Device Settings to enter the camera’s configuration menu. Name Function Wi-Fi Tap to view connected Wi-Fi status or modify the WiFi settings of the camera. Network Status Tap to view current network status. Display Tap to edit On Screen Display settings. Quality Tap to configure the encoding parameters of different stream types.
  • Page 22: Liveview/Playback

    LIVE VIEW/PLAYBACK Live View To view live video feed, tap : on the Devices page or tap your camera to enter Live View . Icon Function Tap this icon to go back to the Devices page. Tap this icon to select a camera that you want to view. Tap this icon to stop or start live view feed.
  • Page 23 How to View Two or more Cameras at the Same Time 1. On the Live View page, tap on top right to enter the “Channel Selection” page. 2. Select the cameras you want to view in the list, and tap back on the top left. 3.
  • Page 24: Playback

    To capture a screenshot of the playing video, tap the Capture button on the bottom, to record the playback video, tap the Record icon. Note : The videos recorded manually and snapshots will be saved to your mobile devices: iOS (Album) Android (Storage/Internal Storage/Uniden Solo).
  • Page 25: Advanced Setting

    ADVANCED SETTING PIR Sensor Setting The built-in PIR motion sensor will detect changes in temperature/radiation. When the PIR motion sensor detects motion, it will trigger an alarm and prompt the camera to take the following action: sound siren/alarm , send Push Notification to your mobile devices, send E-mail alert and Record movement to your SD card.
  • Page 26 Disable/Enable Siren/E-mail/Record When triggered by motion, the camera is able to sends out siren, E-mail, push notification and record to SD card (optional). To disable/enable some actions, follow the steps below: 1. Go to “ Device Settings ” > “ Alarm ” > “ PIR Settings ”. 2.
  • Page 27 Adjust the PIR Sensitivity PIR sensitivities include Low, Mid, and High. PIR sensitivity could have an impact on detecting distance, the higher the sensitivity is, the longer distance the PIR will detect. By default, PIR sensitivity is set as “ Mid ”. You can adjust PIR sensitivities according to your needs.
  • Page 28: E-Mail Settings

    E-mail Settings When triggered by motion, App Cam Solo will send you an email alert if you have configured it to. To configure E-mail settings, please go to “ Device Settings ” > “ E-mail Settings ”.
  • Page 29 Enable SSL or TLS : Whether the email server you’re using requires a • secure link. This is on by default and should be left on if you’re using any of the preset email servers. SMTP Server : Type in the SMTP server for the sender Address. •...
  • Page 30: Video Quality & On Screen Display Setting

    Video Quality & On Screen Display Settings Customize Video/Image Quality Go to “ Device Settings ” > “ Quality ”, configuring the encoding parameters of different stream types according to your actual needs, including Resolution , Frame Rate and Max Bitrate . ●...
  • Page 31 Adjust Display Settings Image Rotation The camera image can be rotated 180 degrees. To adjust that, go to “ Device Settings ” > “ Video&Audio ” > “ Display ”, enable “ Rotation” or “ Mirroring ” according to your needs.
  • Page 32 Display Timestamp & Camera Name By default, the timestamp will be shown on Top Center. Camera name will be shown on Bottom Right . To manage it, go to “ Device Settings ” > “ Video&Audio ” > “ Display ”, if you do not want to display the camera name and timestamp on the live view screen, uncheck “...
  • Page 33: Date And Time Setting

    You can manage the date and time setting by syncing the system time of App Cam Solo camera via Uniden Solo App. To sync it, go to “ Device Settings ” > “ System ” > “ Date & Time ”, Select “Synchronize phone time”...
  • Page 34: Important Information

    IMPORTANT INFORMATION SD Card App Cam Solo supports SD card local storage (used only for motion-triggered recordings). When the camera detects a movement, it will record and save the video to the SD card. You can insert a microSD card into the camera. When the SD card is inserted in, you can check its status in “...
  • Page 35: Battery

    Tap the Format icon on the bottom to format the SD card. Note : Please backup the important data on the SD card before formatting it. Battery Uniden provides 4 non-rechargeable CR123A batteries, one of which has 1600mAH. With these 4 batteries, the Argus supports up to: 180 days in Standby mode;...
  • Page 36 Daily amount of time for live streaming & motion recording will be shown on the calendar. Note : When time of live streaming/recording exceeds 10 minutes, the date will be marked as Orange . Low Battery Notification If the battery is running low, the camera will send you a push notification •...
  • Page 37: Specification

    SPECIFICATION Image Sensor 1/2.9" CMOS Sensor Display Resolution 1920 x 1080 (2.0Megapixel) Focal Length F=2.2 Angle of View Diagonal: 130° (diagonally) PIR Detecting Distance Low: 2-4 Meters, Mid: 4-6 Meters (Default), High: 6-9 Meters Minimum Illumination 0 Lux (with IR Illuminator) IR Distance Up to 10 meters Network Protocols &...
  • Page 38: Warranty

    C. Improperly installed contrary to instructions contained in the relevant Owner’s Manual D. Repaired by someone other than an authorized Uniden Repair Agent in relation to a defect or malfunction covered by this warranty; or E. Used in conjunction with any equipment, parts or a system not manufactured by...
  • Page 39 Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
  • Page 40 © 2017 Uniden Australia Pty Limited. Version 1.0...

Table of Contents