Delete Bluetooth Accessory; Connect Bluetooth Accessory - Cisco 8941 User Manual

Phone Applications
Before you add a Bluetooth accessory, it must be discoverable by the phone. Look for a flashing LED on a
Bluetooth accessory as an indication that it is discoverable. For more information, see the documentation
provided by the Bluetooth accessory manufacturer.
Procedure
Step 1
Press Applications
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
Step 3 Select Add Bluetooth Accessory.
The phone searches for discoverable accessories that are supported. When an accessory is found, it is added
to the list in the Adding Bluetooth Accessory screen.
Step 4 Select the Bluetooth accessory and press Connect.
The phone automatically attempts to connect the accessory using a Bluetooth device PIN of 0000. The Adding
PIN screen displays if your accessory requires a different PIN.
Step 5 Enter the PIN for your accessory if the connection is not acquired automatically.
When the connection is completed, the Bluetooth active icon
check mark displays next to the connected accessory.

Delete Bluetooth Accessory

This procedure applies to the Cisco Unified IP Phone 8945 only.
Procedure
Step 1
Press Applications
Step 2 Use the Navigation pad and Select button to scroll and select Accessories.
Step 3 Select a Bluetooth accessory and press Delete.
Step 4
When prompted, press Yes.
The Bluetooth accessory will be disconnected (if it was connected) and removed from the Accessories list.

Connect Bluetooth Accessory

This procedure applies to the Cisco Unified IP Phone 8945 only.
Before you can connect a Bluetooth accessory, it must be already added as an accessory to the phone.
.
.
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Delete Bluetooth Accessory
displays on the phone screen header and a
25