Phone Screen - Cisco 8941 User Manual

Your Phone
20 Programmable feature buttons
(also called Line buttons)
21 Handset rest

Phone Screen

The way that your system administrator set up your phone determines what displays on your phone screen.
Each corresponds with a phone line, Speed Dial, and calling feature.
Pressing a button for a phone line displays the active calls for that line.
If you have multiple lines, you may have an All Calls button that displays a consolidated list
of all calls from all lines (oldest at the top). Cisco recommends that you keep your phone in
the All Calls view.
Color LEDs indicate the line state:
•
Amber Ringing call on this line
•
Green Active or held call on this line
•
Red Shared line in-use remotely
The positions of the feature buttons can be reversed on phones that use a locale with a
right-to-left reading orientation, such as Hebrew and Arabic.
Provides a rest for the phone handset.
When the phone is ringing with an incoming call, the LED in the handset rest flashes red. If
there is a new voice message, the LED is lit red.
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Phone Screen
9