Cisco 8941 User Manual page 107

Frequently Asked Questions and Troubleshooting Tips
2 Press the Transfer button again. You do not have to wait for the recipient to answer to complete the
transfer.
Q. What does the Swap softkey do?
The Swap softkey allows you to toggle between two calls before completing the transfer or creating
A.
a conference. This allows you to consult privately with the party or parties on each call before combining
the calls into a conference.
Q. Can I cancel a conference or transfer procedure after I have started it?
A.
Yes, before completing a conference or transfer, you can press the Release
to cancel it.
Q. How can I combine two calls on hold into a single conference call?
A. Make sure that one of the calls is active (not on hold). If both calls are on hold, resume one call, then:
1 Press the Conference
2 Press the line button for the other (held) call.
The conference begins. The conference is established on the line that had the active call.
Q. Not all calls present video on my phone. Why not?
A. To see an image of the other party on your phone screen, the other party's phone must support video and
the other party must have a camera installed and enabled on his or her phone. During conference calls, the
conference system in use during the call must support video conferencing.
Q. What happens to video when I put a call on hold?
A. Video transmission is muted (blocked) until you resume the call.
Q. What do the different light colors on my Cisco Unified Video Camera indicate?
A. The colors indicate video transmission states as follows:
• Green: Your video is transmitting.
• Red: Your video is muted.
The disclaimer required for remote workers disappeared before I accepted it. How can I redisplay and
Q.
accept it?
A. To redisplay the disclaimer required for remote workers you must:
1 Press the Applications button.
2 Use the Navigation pad and Select button to scroll and select Running Applications.
The disclaimer required for remote workers reappears.
button.
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Frequently Asked Questions
button or Cancel softkey
97