Customize Do Not Disturb Options; Line Settings; Set Up Call Forward Per Line - Cisco 8941 User Manual

User Options

Customize Do Not Disturb Options

Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2 Set the following options:
• Do Not Disturb: Check the check box to enable or disable DND.
• DND Option: Select either None or Ringer Off (to turn off only the ringer).
• DND Incoming Call Alert (applies to either DND option set): Set the alert to Beep Only, Flash Only,
Step 3 Select Save.
Related Topics
Do Not Disturb, on page 53

Line Settings

Line settings affect a specific phone line (directory number) on your phone. Line settings can include call
forwarding, visual and audio message-waiting indicators, voice-message indicators, ring patterns, and other
line-specific settings.
You can set up other line settings directly on your phone:
Related Topics
Call Forward, on page 45
Call History, on page 13

Set Up Call Forward Per Line

Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2 Select a phone from the Name drop-down menu.
Step 3 Select Line Settings.
Step 4 If you have more than one directory number (line) assigned to your phone, select a line from the Line drop-down
menu.
Step 5 In the Incoming Call Forwarding area, select call forwarding settings for various conditions.
Step 6 Select Save.
Disable, or select None (to use the Alert setting set up by your system administrator).
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
Customize Do Not Disturb Options
79