Intercom
Procedure
Step 1
Press Queue Status. The Queue status window appears.
Step 2
To refresh the statistics, press Refresh.
Step 3
To exit, press Exit.
Intercom
Intercom allows you to place and receive one-way calls using a dedicated or dialable intercom line.
When you place an intercom call, the recipient's phone autoanswers with mute activated (whisper mode) and
broadcasts your message through the recipient's speakerphone, headset, or handset, if one of these devices is
active.
After receiving the intercom call, the recipient can initiate two-way audio (connected mode) to allow for
further conversation.
Place Dedicated Intercom Call
Procedure
Step 1
Press Intercom.
Your phone enters whisper mode until the recipient accepts the intercom call. If you are on an active call, that
call is placed on hold.
Step 2
Listen for the intercom alert tone, then begin speaking.
Step 3
Press Intercom to end the call.
Place Dialable Intercom Call
Procedure
Step 1
Press Intercom.
Step 2
Enter the intercom code.
Your phone enters whisper mode until the recipient accepts the intercom call. If you are on an active call, that
call is placed on hold.
Step 3
Listen for the intercom alert tone, then begin speaking.
Step 4
Press Intercom to end the call.
Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
58
Calling Features