Compatibility, Revision Numbers - Siemens 7MF4333 User Manual

UMSITRPDS3-1
6. Reason for return for repair; include system failure symptoms, station failure symptoms, and error
codes displayed.
Returns should be packaged in original shipping materials if possible. Otherwise, package item for safe
shipment or contact factory for shipping recommendations. Refer to Section 1.4 Customer/Product
Support to obtain a Return Material Authorization (RMA) number.
The electronics module and display must be placed in static shielding bags to
protect them from electrostatic discharge.

7.9 COMPATIBILITY, Revision Numbers

From the HART Communicator, the transmitter can be asked to display four revision numbers.
•
Universal Revision - This revision of the universal device description software enables
communication between the transmitter and an external device, such as a HART Communicator.
•
Field Device Revision - This Device Description is needed for detailed communication between the
transmitter and other HART devices.
•
Software (i.e. firmware) Revision - Since software controls the transmitter's operating routines and its
HART communications with loop-connected stations and gateways. When requesting technical
information or during troubleshooting, it often is necessary to know the transmitter's software
revision level. A single digit identifies the transmitter software revision level.
•
Hardware Revision - This is the revision number of the transmitter's hardware.
To view the revision numbers:
1. Establish communication with the transmitter (see Section 3.2).
2. In the Online menu, press 3 Device Setup.
3. In the Device Setup menu, press 4 Detailed Setup.
4. In the Detailed Setup menu, press 4 Device Information.
5. In the Device Information menu, press 6 Revision Numbers.
6. Read and note the revision number of interest.
November 2010
IMPORTANT
Calibration And Maintenance
!
7-19