Siemens 7MF4333 User Manual page 2

Many procedures, screens, and wiring diagrams shown in this manual feature the Model 275 HART
Communicator.
The Model 375 Field Communicator is also available. Procedures and screens are similar to those for the
Model 275, however, there are significant differences and an online Configuration Map for use with the
Model 375 is provided at the back of this manual.
Transmitter model and firmware version can affect the displays, display options, and Configuration Maps.
Whether using the Model 275 or the Model 375, be sure to read the manual supplied by the manufacturer
before installing or using the device. Refer to the communicator nameplate for hazardous area
certifications and approvals and other important information.
The following table provides an overview of measurement categories and available models. For details
pertaining to a particular model, see the appropriate section for a dimension drawing, the model
designation table and specifications in Section 9 Model Designations and Specifications. To quickly
locate other information, refer to the Table of Contents.
Measurement
Absolute or Gauge
Pressure
Differential
Pressure
Level (Flange)
MODEL 275 HART COMMUNICATOR AND
MODEL 375 FIELD COMMUNICATOR
APPLICATION AND MODEL QUICK LOCATOR
See
Models
Section
7MF4033 9.1
7MF4233 9.2
7MF4333 9.3
7MF4433
9.4
7MF4533
7MF4633
9.5
7MF4812
IMPORTANT
Dimensions
Figure 9-1
Figure 9-2
Figure 9-3
Figure 9-3 or 9-4
Figure 9-5
Model
Specifications
Designation
Table 9-1
Table 9-3
Table 9-5
Table 9-7
Table 9-8
Table 9-10 Table 9-11
Table 9-2
Table 9-4
Table 9-6
Table 9-9