Front Components
F1 Reset
F2 MIC IN/LINE OUT
F3 USB 3.0 Port
F4 Four USB 2.0 Ports
F5 Two 10/100/1000Mbps LAN ports
LINK/ACT
F6 HDD (Yellow)
3G Status (Green) and
Power LED (Green)
F7 Power-on Switch
F8 Power Button with dual LED
F2
F3
F1
Component
sPEEd
F5
F4
Description
Reset switch
Connect the audio devices to these ports. The
Microphone and line out port are provided by
Realtek ALC 886-GR.
An USB 3.0 type A connector.
Double-stacked USB 2.0 type A connectors
Two additional USB 2.0 ports by LEK-IOA11. add-
on board
Two RJ-45 (network) jacks with LED indicators are
as described below.
LINK/ACT (Yellow)
•
On/Flashing: The port is linking and active in
data transmission.
•
Off: The port is not linking.
SPEED (Green/Yellow)
•
Yellow: The connection speed is 1000Mbps.
•
Green: The connection speed is 100Mbps
•
Off: The connection speed is 10Mbps.
HDD
•
Blinking: data access activities
•
Off: no data access activities
3G Status
•
Blinking: 3G transmission activities
•
On: 3G expansion card exists
•
Off: no 3G expansion card present
Power
•
On: The computer is on.
•
Off: The computer is off .
A power-on switch through the Phoenix
contact for distant power-on/off control
ATX Power-on button with LEDs: Standby
mode in Red; Power-on mode in Green
F7
F6
F8