Setting Emulation Memory; Emulation Memory Allocation As Expansion Area - Renesas Emulation Probe M30850T-EPB User Manual

(3) Setting Emulation Memory

This product has two kinds of emulation memory and how to allocate is different depending on which
processor mode is selected. Table 4.2 shows how to set the emulation memory for each processor
mode.
Table 4.2 Setting the emulation memory
Processor mode
Single-chip Mode
Memory Expansion Mode
Microprocessor Mode

(4) Emulation Memory Allocation as Expansion Area

This section explains about setting emulation memory for expansion purposes in memory expansion
mode and microprocessor mode. To use emulation memory as expansion area, set memory allocation
as indicated here below. Emulation memory specifications are given in Table 4.3.
(1) Setting bank address (Bank):
For example, specifying "C0" allocates the bank from address C00000h.
When 256 KB is specified as the Length, bank addresses can be specified from 00, 04, 08 up to
FC in 256KB blocks.
When 1 MB is specified as the Length, bank addresses can be specified from 00, 10, 20 up to F0
in 1MB blocks.
(2) Specifying area size (Length): Specify the size of the specified expansion area. The area from
(3) Specifying area map (Map):
• When INTERNAL is specified: This bank is allocated as internal area and used for expan-
• When EXTERNAL is specified: This bank is allocated as external area and used by the target
• When No Use is specified:
Areas not specified here are allocated as external area. The only difference from the area specified
as EXTERNAL area is download speed. Download to the area specified as EXTERNAL area is
faster than to the other unspecified areas.
Internal flash memory
F000h--FFFFh, F80000h--FFFFFFh
are allocated automatically.
F000h--FFFFh, F80000h--FFFFFFh
are allocated automatically.
Cannot be used.
Specify the bank address of the area to be allocated for expansion
as a hexadecimal number.
the specified address to the size specified here is allocated as
external area and internal area. Length can be specified as 256
KB or 1 MB.
Select whether the specified area is to be allocated as internal
area (used as emulation memory) or external area (used by an
external device, etc.).
sion.
system as an external resource.
This bank is allocated as external area and used by the target
system as an external resource.
( 53 / 76 )
Emulation memory for expansion
Cannot be used.
Possible to specify the desired area
between Area 1 and 4.
Possible to specify the desired area
between Area 1 and 4.