Package Components; Other Tool Products Required For Development - Renesas Emulation Probe M30850T-EPB User Manual

2.2 Package Components

The M30850T-EPB package consists of the following items. When unpacking, check to see if your
M30850T-EPB contains all of these items.
Table 2.1 Package components
M30850T-EPB emulation probe
M30800T-PTC converter board for 100-pin LCC
IC61-1004-051 100-pin LCC socket made by Yamaichi Electronics Co., Ltd.
OSC-3 (32 MHz) oscillator circuit board
OSC-2 oscillator circuit board (bare board)
Hardware tool user registration FAX sheet (English)
Hardware tool user registration FAX sheet (Japanese)
M30850T-EPB user's manual (this manual)
M30850T-EPB user's manual (Japanese)
* Please keep the M30850T-EPB's packing box and cushion material in your place for reuse at a
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics

2.3 Other Tool Products Required for Development

To bring forward programs development on the M32C/80, 84, 85 and 86 Group MCUs, the products
listed below are necessary in addition to those contained package above. Get them separately.
Table 2.2 Other tool products required for development
* To purchase these products, contact your local distributor.
later time when sending your product for repair or other purposes. Always use these packing box
and cushion material when transporting this product.
Co., Ltd.
http://www.yamaichi.co.jp/e/index.shtml
Product
Emulator main unit
Emulator debugger
144-pin 0.5-mm-pitch LQFP
(144P6Q-A)
100-pin 0.5-mm-pitch LQFP
(100P6Q-A)
100-pin 0.65-mm-pitch QFP
(100P6S-A)
Item
Product name
PC7501
M3T-PD308F V.3.20
Release 1 or later
M3T-FLX-144NSD
M3T-100LCC-QSD
M3T-100LCC-DMS
+
M3T-FLX-100NSD
M3T-F160-100NSD
M3T-100LCC-DMS
+
M3T-DUMMY100S
M3T-100LCC-DMS
+
M3T-DIRECT100S
M3T-100LCC-DMS
+
M3T-FLX-100NRB
( 21 / 76 )
Quantity
Notes
Required
Required
Required according to the foot
pattern of the target system
(see "3.8 Connecting the Target
System" on page 37)
1
1
1
1
1
1
1
1
1