Renesas Emulation Probe M30850T-EPB User Manual page 56

POWER POWER
SAFE CLOCK
ERROR RESET
RUN
WARNING
SYSTEM TARGET
STATUS STATUS
Maintenance mode started
ERROR 1
SAFE and ERROR flash
ERROR 2
SAFE flashes and
ERROR lights
ERROR 3
SAFE and ERROR
light alternately
ERROR 4
SAFE goes out and
ERROR lights
Figure 4.4 Self-check procedure
POWER POWER
SAFE CLOCK
ERROR RESET
RUN
WARNING
SYSTEM TARGET
STATUS STATUS
Self-check terminated normally
POWER POWER
SAFE CLOCK
ERROR RESET
RUN
WARNING
SYSTEM TARGET
STATUS STATUS
Emulation probe and firmware
do not match
POWER POWER
SAFE CLOCK
ERROR RESET
RUN
WARNING
SYSTEM TARGET
STATUS STATUS
PC7501 system status error
POWER POWER
SAFE CLOCK
ERROR RESET
RUN
WARNING
SYSTEM TARGET
STATUS STATUS
Emulation probe initialization error
POWER POWER
SAFE CLOCK
ERROR RESET
RUN
WARNING
SYSTEM TARGET
STATUS STATUS
Emulation probe status error
( 56 / 76 )
: ON
: OFF
: Flashing
• When the proper firmware for the
emulation probe is not downloaded
• When the emulation probe is not
connected properly
• When the PC7501 system is not
working properly
• When a clock is not supplied to the
emulation probe
• When the emulation probe is not
working properly