Speakers
Description
Speakers (includes cable)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
6.
Remove the system board (see
Remove the speakers:
1.
Remove the Phillips PM2.0×4.6 screw (1) that secures the speakers to the bottom cover.
2.
Release the display panel cable and the wireless antenna cables from the routing clips (2) built into
the speakers.
3.
Release the speakers (3) by tilting the front edge up.
4.
Remove the speakers (4) by sliding them forward.
Reverse this procedure to install the speakers.
Keyboard/top cover on page
System board on page
46).
Spare part number
856108-001
32).
Battery on page
39).
Component replacement procedures
55