HP Pavilion x360 m1-u100 Maintenance And Service Manual page 49

4. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.1 screws (1) that
secure the bracket to the hard drive, and then remove the hard drive bracket (2).
5. If it is necessary to replace the hard drive cable, detach the cable (3) from the hard drive. (The hard drive
cable is attached to the hard drive with double-sided adhesive.)
6. Slide the cable (4) off of the front end of the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures 41