Table of Contents
Advertisement
Connector board
NOTE:
The connector board spare part kit includes an audio jack and a USB port.
NOTE:
The connector board spare part kit does not include the connector board cable. The connector board
cable is available using spare part numbers 856059-001 (for use only on computer models equipped with an
Intel Core processor) and 856060-001 (for use only on computer models equipped with an Intel Pentium or
Intel Celeron processor).
Description
For use only on computer models equipped with an Intel Core processor
For use only on computer models equipped with an Intel Pentium or Intel Celeron processor
Before removing the connector board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Remove the connector board:
1.
Release the ZIF connector (1) to which the connector board cable is connected, and then disconnect
the connector board cable from the system board.
2.
Detach the connector board cable (2) from the battery. (The connector board cable is attached to
the battery with double-sided adhesive.)
3.
Release the ZIF connector (3) to which the power button board cable is connected, and then disconnect
the power button board cable from the connector board.
4.
Remove the two Phillips PM2.0×4.6 screws (4) that secure the connector board to the bottom cover.
Keyboard/top cover on page
Battery on page
Spare part number
909095-001
856099-001
32).
39).
Component replacement procedures
43
Advertisement
Table of Contents
