Table of Contents
Advertisement
d.
Disconnect the display panel cable (2) from the display panel.
e.
Release the display panel cable from the retention clips (3) built into the display bezel.
f.
Release the adhesive support strip (4) that secures the TouchScreen board cable connector to
the TouchScreen board.
g.
Release the ZIF connector (5) to which the TouchScreen board cable is connected, and then
disconnect the TouchScreen board cable (6) from the TouchScreen board.
h.
Remove the display panel cable (7).
The display panel cable is available using spare part numbers 856063-001 (for use only on
computer models with model numbers m1-u100 through m1-u199) and 902941-001 (for use only
on computer models with model numbers m1-u000 through m1-u099) and includes
the TouchScreen board cable.
i.
Remove the display panel assembly (8).
The 11.6-in, HD, AG (1366×768), WLED, UWVA, TouchScreen display panel assembly is available
using spare part number 856101-001.
7.
If it is necessary to replace the webcam/microphone module:
a.
Remove the display panel assembly.
b.
Detach the webcam/microphone module (1) from the display back cover. (The webcam/
microphone module is secured to the display back cover with double-sided adhesive.)
58
Chapter 5 Removal and replacement procedures
Advertisement
Table of Contents
