Displaying And Maintaining Ead Fast Deployment - HP A5830 Series Configuration Manual

To do...
2. Configure a free IP.
When global MAC authentication or port security is enabled, the free IP does not take effect.
If you use the free IP, guest VLAN, and Auth-Fail VLAN features together, make sure that the free IP
segments are in both guest VLAN and Auth-Fail VLAN. Users can access only the free IP segments.
Configuring the redirect URL
To do...
1. Enter system view.
2. Configure the redirect URL.
The redirect URL must be on the free IP subnet.
Setting the EAD rule timer
EAD fast deployment automatically creates an ACL rule, or an EAD rule, to open access to the redirect
URL for each redirected user seeking to access the network. The EAD rule timer sets the lifetime of each
ACL rule. When the timer expires or the user passes authentication, the rule is removed. If users fail to
download EAD client or fail to pass authentication before the timer expires, they must reconnect to the
network to access the free IP.
To prevent ACL rule resources from being used up, you can shorten the timer when the number of EAD
users is large.
To set the EAD rule timer:
To do...
1. Enter system view.
2. Set the EAD rule timer.

Displaying and maintaining EAD fast deployment

To do...
Display 802.1X session
information, statistics, or
configuration information
Use the command...
dot1x free-ip ip-address { mask-
address | mask-length }
Use the command...
system-view
dot1x url url-string
Use the command...
system-view
dot1x timer ead-timeout ead-
timeout-value
Use the command...
display dot1x [ sessions | statistics ] [
interface interface-list ] [ | { begin |
exclude | include } regular-expression ]
92
Remarks
Required.
By default, no free IP is
configured.
Remarks
—
Required.
By default, no redirect URL is
configured.
Remarks
—
Optional.
The default timer is 30 minutes.
Remarks
Available in any view