HP A5830 Series Configuration Manual page 26

To do...
7. Set the maximum number of
concurrent users of the local
user account.
Set the
password
aging time.
8. Configure the
Set the
password
minimum
control
password
attributes for
length.
the local user.
Configure
the
password
composition
policy.
9. Configure the binding
attributes for the local user.
10. Configure the authorization
attributes for the local user.
Set the validity time of the
11.
local user.
12. Set the expiration time of the
local user.
Use the command...
access-limit max-user-number
password-control aging aging-
time
password-control length
length
password-control composition
type-number type-number [
type-length type-length ]
bind-attribute { call-number
call-number [ : subcall-number
] | ip ip-address | location
port slot-number subslot-
number port-number | mac
mac-address | vlan vlan-id } *
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut
minute | level level | user-
profile profile-name | user-
role { guest | guest-manager
| security-audit } | vlan vlan-
id | work-directory directory-
name } *
validity-date time
expiration-date time
18
Remarks
Optional.
By default, there is no limit to the
maximum number of concurrent users
of a local user account.
The limit is effective only for local
accounting and is not effective for FTP
users.
Optional.
By default, the setting for the user
group is used. If there is no such
setting for the user group, the global
setting (90 days by default) is used.
Optional.
By default, the setting for the user
group is used. If there is no such
setting for the user group, the global
setting (10 characters by default) is
used.
Optional.
By default, the settings for the user
group are used. If there is no such
setting for the user group, the global
settings (both are 1 by default) are
used.
Optional.
By default, no binding attribute is
configured for a local user.
Binding attributes are only intended
for and LAN users.
Optional.
By default, no authorization attribute
is configured for a local user.
For LAN users, only acl, idle-cut, user-
profile, and vlan are supported.
For SSH, terminal, and Web users,
only level is supported.
For FTP users, only level and work-
directory are supported.
For Telnet users, only level and user-
role is supported.
For other types of local users, no
binding attribute is supported.
Optional.
Not set by default.
Optional.
Not set by default.