HP A5830 Series Configuration Manual page 48

No authorization (none)—The NAS performs no authorization exchange. After passing
•
authentication, non-login users can access the network, FTP users can access the root directory of
the NAS, and other login users have only the rights of Level 0 (visiting).
Local authorization (local)—The NAS performs authorization according to the user attributes
•
configured for users.
Remote authorization (scheme)—The NAS cooperates with a RADIUS or HWTACACS server to
•
authorize users. RADIUS authorization is bound with RADIUS authentication. RADIUS authorization
can work only after RADIUS authentication is successful, and the authorization information is
carried in the Access-Accept message. HWTACACS authorization is separate from HWTACACS
authentication, and the authorization information is carried in the authorization response after
successful authentication. You can configure local authorization or no authorization as the backup
method, which is used when the remote server is not available.
Before you configure authorization methods, complete the following tasks:
For HWTACACS authorization, configure the HWTACACS scheme to be referenced first. For
1.
RADIUS authorization, the RADIUS authorization scheme must be the same as the RADIUS
authentication scheme; otherwise, it does not take effect.
Determine the access type or service type to be configured. With AAA, you can configure an
2.
authorization scheme for each access type and service type, limiting the authorization protocols
that can be used for access.
Determine whether to configure an authorization method for all access types or service types.
3.
To configure AAA authorization methods for an ISP domain:
To do...
1. Enter system view.
2. Enter ISP domain view.
3. Specify the default
authorization method for
all types of users.
4. Specify the command
authorization method.
5. Specify the authorization
method for LAN users.
6. Specify the authorization
method for login users.
The authorization method specified with the authorization default command is for all types of users and
has a priority lower than that for a specific access type.
If you configure an authentication method and an authorization method that use RADIUS schemes for an
ISP domain, the RADIUS scheme for authorization must be the same as that for authentication. If the
RADIUS authorization configuration is invalid or if RADIUS authorization fails, the RADIUS authentication
also fails. Whenever RADIUS authorization fails, an error message is sent to the NAS, indicating that the
server is not responding.
Use the command...
system-view
domain isp-name
authorization default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name
[ local ] }
authorization command { hwtacacs-scheme
hwtacacs-scheme-name [ local | none ] |
local | none }
authorization lan-access { local | none |
radius-scheme radius-scheme-name [ local
| none ] }
authorization login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name
[ local ] }
40
Remarks
—
—
Optional.
It is set to local by default.
Optional.
The default authorization
method is used by default.
Optional.
The default authorization
method is used by default.
Optional.
The default authorization
method is used by default.