HP A5830 Series Configuration Manual page 38

The failure ratio is generally small. If a trap message is triggered because the failure ratio is higher than
the threshold, troubleshoot the configuration and the communication between the NAS and the RADIUS
server.
To enable the trap function for RADIUS:
To do...
Enter system view.
1.
2. Enable the trap
function for RADIUS.
Enabling the RADIUS listening port of the RADIUS client
The client can receive and send RADIUS packets only after you enable the RADIUS listening port of a
RADIUS client. If RADIUS is not required, disable the RADIUS listening port to avoid attacks that exploit
RADIUS packets.
To enable the RADIUS listening port of a RADIUS client:
To do...
1. Enter system view.
2. Enable the RADIUS listening
port of a RADIUS client.
Displaying and maintaining RADIUS
To do...
Display the configuration information
of RADIUS schemes
Display the statistics for RADIUS
packets
Display information about buffered
stop-accounting requests for which no
responses have been received
Clear RADIUS statistics
Clear the buffered stop-accounting
requests for which no responses have
been received
Use the command...
system-view
radius trap { accounting-server-down |
authentication-error-threshold | authentication-
server-down }
Use the command...
system-view
radius client enable
Use the command...
display radius scheme [ radius-scheme-
name ] [ slot slot-number ] [ | { begin
| exclude | include } regular-
expression ]
display radius statistics [ slot slot-
number ] [ | { begin | exclude |
include } regular-expression ]
display stop-accounting-buffer {
radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name user-
name } [ slot slot-number ] [ | { begin
| exclude | include } regular-
expression ]
reset radius statistics [ slot slot-number
]
reset stop-accounting-buffer { radius-
scheme radius-server-name | session-
id session-id | time-range start-time
stop-time | user-name user-name } [
slot slot-number ]
30
Remarks
—
Required
Disabled by default
Remarks
—
Optional
Enabled by default
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view