Displaying And Maintaining Public Keys; Public Key Configuration Examples; Manually Specifying The Peer Public Key On The Local Device - HP A5830 Series Configuration Manual

To manually configure the peer public key on the local device:
To do...
1. Enter system view.
2. Specify a name for the public
key and enter public key
view.
3. Enter public key code view.
4. Configure the peer public
key.
5. Return to public key view.
6. Return to system view.

Displaying and maintaining public keys

To do...
Display the local public keys
Display the specified or all peer
public keys on the local device

Public key configuration examples

Manually specifying the peer public key on the local device

Network requirements
As shown in
peer device) through a digital signature. Before you configure authentication parameters on Device B,
configure the public key of Device A on Device B.
Configure Device B to use the asymmetric key algorithm of RSA to authenticate Device A.
•
Manually specify the host public key of Device A's public key pair on Device B.
•
Figure 43 Network diagram for manually specifying a peer public key
Use the command...
system-view
public-key peer keyname
public-key-code begin
Type or copy the key
public-key-code end
peer-public-key end
Use the command...
display public-key local { dsa | rsa } public
[ | { begin | exclude | include } regular-
expression ]
display public-key peer [ brief | name
publickey-name ] [ | { begin | exclude |
include } regular-expression ]
Figure 43, to prevent illegal access, Device B (the local device) authenticates Device A (the
Remarks
—
Required.
—
Required.
Spaces and carriage returns are
allowed between characters.
Required.
When you exit public key code
view, the system automatically
saves the public key.
—
142
Remarks
Available in any view