HP A5830 Series Configuration Manual page 20

Security switch
Hide thumbs Also See for A5830 Series:
Table of Contents

Advertisement

Number
Attribute
15
Login-Service
18
Reply-Message
26
Vendor-Specific
27
Session-Timeout
28
Idle-Timeout
31
Calling-Station-Id
32
NAS-Identifier
40
Acct-Status-Type
45
Acct-Authentic
60
CHAP-Challenge
61
NAS-Port-Type
79
EAP-Message
Message-
80
Authenticator
Description
Type of the service that the user uses for login.
Text to be displayed to the user, which can be used by the server to
indicate, for example, the reason of the authentication failure.
Vendor specific attribute. A packet can contain one or more such
proprietary attributes, each of which can contain one or more sub-
attributes.
Maximum duration of service to be provided to the user before
termination of the session.
Maximum idle time permitted for the user before termination of the
session.
User identification that the NAS sends to the server. For the LAN
access service provided by an HP device, this attribute carries the
MAC address of the user in the format HHHH-HHHH-HHHH.
Identification that the NAS uses for indicating itself.
Type of the Accounting-Request packet:
1—Start
2—Stop
3—Interium-Update
4—Reset-Charge
7—Accounting-On (Defined in 3GPP, the 3rd Generation
Partnership Project)
8—Accounting-Off (Defined in 3GPP)
9 to 14—Reserved for tunnel accounting
15—Reserved for failed
Authentication method used by the user:
1—RADIUS
2—Local
3—Remote
CHAP challenge generated by the NAS for MD5 calculation during
CHAP authentication.
Type of the physical port of the NAS that is authenticating the user:
15—Ethernet
16—Any type of ADSL
17—Cable (with cable for cable TV)
201—VLAN
202—ATM
If the port is an ATM or Ethernet port and VLANs are implemented on
it, the value of this attribute is 201.
Used for encapsulating EAP packets to allow the NAS to authenticate
dial-in users via EAP without having to understand the EAP protocol.
Used for authentication and checking of authentication packets to
prevent spoofing Access-Requests. This attribute is used when RADIUS
supports EAP authentication.
12

Advertisement

Table of Contents
loading

Table of Contents