Intrinsyc Open-Q 410 Quick Start Manual page 2

Qualcomm
Setup
1. Remove the development kit board carefully from the anti static bag
2. Connect the HDMI cable from the development kit to your display
3. Connect the Power Adapter; press the power button (PWR)
for 5 seconds, the board will boot automatically
4. Documentation and software
To access the documentation (schematics, user guides, datasheets,
programming guides, tech notes...), platform BSP software and much more,
please register at: http://support.intrinsyc.com
™
Open-Q 410 Development Kit based on the
®
Snapdragon
Quick Start Guide
Specifications are subject to change - Open-Q 410 QSG Rev. 1.2
™
410 processor (APQ8016)
For more information or assistance make sure to visit the Open-Q 410 FAQ page:
http://www.intrinsyc.com/snapdragon-support/faq
You can also contact us at
Should you require additional technical support for your Development Kit you can
easily purchase a block of technical support hours from the Intrinsyc store:
http://shop.intrinsyc.com/collections/product-development-kits
Thank you for purchasing the Open-Q 410 Development Kit
The Intrinsyc team
Support
support@intrinsyc.com