Connection Procedure - Renesas M32182T2-PTC Instruction Manual

Converter for in-circuit connection

Enlarged version

5. Connection Procedure

The procedure for connecting the M32182T2-PTC is shown

according to applications. See Figures 2 to 4.

5.1 For the M32100T2-SDI-E

(1) Mount the NQPACK144SD.

(2) Mount the YQPACK144SD on the NQPACK144SD.

(3) Secure the four corners of the YQPACK144SD with the

YQ-GUIDE's.

(4) Set the clock select switch.

(5) Mount the M32182T2-PTC on the YQPACK144SD.

(6) Connect the emulator probe to the M32182T2-PTC.

Connection to the M32100T2-SDI-E

: Position of No. 1 pin

Be sure to match the position of No. 1 pin of the foot pattern

and each part.

Figure 2 Connection to the M32100T2-SDI-E

( 3 / 7 )

Table of Contents