Cautions To Be Taken For This Product - Renesas M32182T2-PTC Instruction Manual

8. Precautions
Cautions to Be Taken for Emulator:
Cautions for Differences between MCUs and This Product:

Cautions to Be Taken for This Product:

• For debugging, use this product in the combination with the M32170T-SDI,
M32100T-SDI-E or M32100T2-SDI-E emulator.
• When using with the M32170T-SDI or M32100T-SDI-E, the following restriction
is applied according to the MCU operating frequency.
- More than 66 MHz:
Compared with the M32100T2-SDI-E, more loss of trace information occurs.
- 66 MHz or less:
Same as the M32100T2-SDI-E.
• When using with the M32170T-SDI or M32100T-SDI-E, connect the both cables
for connecting the emulator, the SDI MCU control interface cable (10-pin) and the
SDI trace interface cable (20-pin).
• For the precautions for the combination of the emulator, refer to the user's manual
of each emulator.
• For debugging, as the M32180F8VWG (1MB internal Flash ROM) on the M32182T2-
PTC is used, be careful about the difference of the internal Flash ROM size when
using the M32182F3xFP.
• When the clock select switch is set to the "SOCKET" side, the oscillation occurs by
itself, be careful about the difference of the resistance and the capacitor.
• The capacitive load of the all lines of the MCU will increase depending on wirings
and connectors. Use the part whose timing is critical after checking it works
properly.
• When connecting the YQPACK144SD, be sure to use the included YQ-GUIDE's.
• We cannot accept any request for repair.
• For purchasing the NQPACK144SD, YQPACK144SD and HQPACK144SD, contact
the following:
Daimaru Kogyo Ltd.
http://www.daimarukogyo.co.jp/index_e.htm
Tokyo Eletech Corporation
http://www.tetc.co.jp/e_tet.htm
• For inquiries about the product or the contents of this manual, contact your local
distributor.
Renesas Tool Homepage http://www.renesas.com/en/tools
( 7 / 7 )
CAUTION