Advertisement
1. Description
M3T-64DIP-DMS is a converter board to connect the
64-pin RSS type emulator MCU to the DUMMY64
(not included). Using the DUMMY64, the
M3T-64DIP-DMS converts the pin assignments
of an emulator MCU for the 64-pin 0.8mm pitch QFP.
2. Package Components
(1) 64DIP-DMS converter board
(2) 64DIP-DMS User's Manual (this manual)
3. Specifications
Table 1 Specifications
Item
Package
Insertion/removal
iterations of connector
4. Application
(see Figure 2)
Mount DUMMY64 on the QFP socket on the target, then
connect it to the probe of the emulation pod.
5. Connection Procedure
To mount QFP socket
(1) Mount the socket on the target.
* Be sure to prepare a foot pattern for holding
devices (4 corners) to solder the socket.
(2) Mount the DUMMY64 on the socket.
(3) Attach the socket frame to the socket.
(4) Mount an emulator MCU on the 64DIP-DMS.
(5) Connect the M38000TL2-FPD to the 64DIP-DMS.
(6) Connect the M3T-64DIP-DMS to the DUMMY64.
(see Figure 1)
Description
PRQP0064GA-A (formerly: 64P6N-A)
P
(64-pin 0.8mm pitch QFP)
64D0
(64-pin 0.8mm pitch QFN)
20 times guaranteed
(see Figure 2)
Figure 1 Package components of M3T-64DIP-DMS
: position of No. 1 pin
Be sure to match the position of
No. 1 pin of the foot pattern and
each pin.
Figure 2 Usage of M3T-64DIP-DMS
(2/4)
M3T-64DIP-DMS main unit
M38000TL2-FPD
(5)
Emulator MCU
(4)
64DIP-DMS
(6)
Socket frame
(3)
DUMMY64 main unit
(2)
Socket
(1)
Foot pattern
Advertisement
