Renesas M32182T2-PTC Instruction Manual page 6

Converter for in-circuit connection

Enlarged version

5.2 For the M32100T-SDI-E and M32170T-SDI

(1) Mount the NQPACK144SD.

(2) Mount the YQPACK144SD on the NQPACK144SD.

(3) Secure the four corners of the YQPACK144SD with the

YQ-GUIDE's.

(4) Set the clock select switch.

(5) Mount the M32182T2-PTC on the YQPACK144SD.

(6) Mount the M3T-PTC-CNV on the M32182T2-PTC.

(7) Connect the probe of the emulation pod and the

M32182T2-PTC via the SDI MCU control interface

cable and the SDI trace interface cable.

Connection to the M32100T-SDI-E or M32170T-SDI

: Position of No. 1 pin

Be sure to match the position of No. 1 pin of the foot pattern

and each part.

Figure 3 Connection to the M32100T-SDI-E or M32170T-SDI

( 4 / 7 )

Table of Contents