Advertisement
1. Outline
The R0E33062PMSRC0 is an emulation memory board for the M16C/60 Series compact emulator. The memory space can be
allocated to the emulation memory by using with the M16C/60 Series compact emulator M3062PT3-CPE etc.
2. Package Components
Table 1 Package Components
R0E33062PMSRC0 emulation memory board
Spacers for fixing the emulation memory board
R0E33062PMSRC0 User's Manual (this document)
R0E33062PMSRC0 User's Manual (Japanese)
3. Connection Procedure
The procedure for connecting the R0E33062PMSRC0 is shown in Figure 1.
Screws
Spacers
Screws
Figure 1 Connecting procedure of the emulation memory board
Cautions to Be Taken for This Product:
Before you replace the emulation memory board, shut off the power, otherwise internal circuits may be damaged.
Insert or pull out the connectors vertically, otherwise the connectors may be damaged.
Item
(1) Unscrew the four screws securing the emulation probe.
(2) Pull out the M3062PT2-EPBM from the compact emulator control
M3062PT2-EPBM
(3) Attach connectors J1 and J2 of the new R0E33062PMSRC0 to
(4) Tighten the spacers (included) in an even, crisscross pattern to
R0E33062PMSRC0
(5) Attach connectors J1 and J2 of the M3062PT2-EPBM to connectors
(6) Tighten the four screws (which are unscrewed in the procedure 1) in
R0E33062PMSRC0
(7) After replacing the board, perform the self-check to make sure that
M3062PT2-EPBM
CAUTION
board (hereafter, upper board) vertically, otherwise the connectors
may be damaged.
connectors J3 and J4 of the upper board, respectively.
secure the R0E33062PMSRC0 with such as box wrench.
J3 and J4 of the R0E33062PMSRC0, respectively.
an even, crisscross pattern to secure the M3062PT2-EPBM with a
screwdriver.
the R0E33062PMSRC0 has been installed properly.
(2/4)
Quantity
1
4
1
1
Advertisement
