Setting Communication Conditions
4.2.4 Option Settings
Set the parameters in the option dialogbox of Configurator WD for the User connection or
System connection.
PROCEDURE
1. Activate unit name, when connected unit is indicated.
The unit name will be highlighted.
2. Select "Edit" > "Communication Setting" from the menu bar.
"Communication Setting" dialigbox will open.
3. Press [Option].
"Option" dialigbox will open.
4. Enter the desired items.
See the next page for the details.
5. Press [OK].
"Communication Setting" dialigbox will open.
6. Press [OK] in the "Communication Setting" dialigbox.
The message box "Unit communication setting was completed" will appear.
7. Press [OK].
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com