Panasonic AFP7CPS Series User Manual page 31

 Option Setting
Parameter
End code
Judgement time without
termination
Destination unit
number and IP
address is
Target IP
specified
Address
for unit
number
Unit Number
IP Address
Action Mode
Protocol Mode
Communication
Mode
System
connection
Source Port No.
Timeout
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
This is the code for the AFP7 CCET1 to confirm the end
of the message (data) to be received from the FP7 CPU
unit.
CR, CR+LF or NONE can be selected.
Reception continues until the end of the message (CR,
CR+LF) will be received. When selecting NONE, the end
code is not confirmed.
Set the wait time for the end code.
If the next message (data) is not received within the
judgment time without termination (ms) after the last
received message (data), the AFP7 CCET1 judges that is
no termination, and performs the following operation.
(End code: when selecting CR, CR+LF)
The received message (data) is discarded. For TCP, the
connection is disconnected.
(End code: when selecting NONE)
The message (data) is transmitted to the connected
destination.
A command is transmitted to the IP address
corresponding to the unit number.
Specify a station number
Specify a value between 1 and 99 in decimal format
Specify IP address
Server Mode is fixed for the "System connection".
Protocol Mode of Communication cassette AFP7 CCET1
TCP is fixed.
Communication Mode of Communication cassette AFP7
CCET1
MEWTOCOL is fixed.
Port number that AFP7 CCET1 opens.
Range：1025 to 32767
If AFP7 CCET1 not communicate with a destination
device during this setting time (seconds) in the state that
connection is established, connection will be cut.
Range：0 to1800s When 0 is set, the connection will
not be cut.
4.2 Specified using Configurator WD
Default
CR
20ms
N/A
N/A
192.168.1.100
Server Mode
TCP
MEWTOCOL
9094
15 sec