Table of Contents
Advertisement
Specified using FPWINGR7 (COM.1port)
Parameter
Communication
mode
Station No.
Baud rate
Data length
Parity
Stop bit
RS/CS
Send waiting
time
Terminator
setting
Terminator
judgement time
Header STX
Modem
initialization
KEY POINTS
The parameters "Communication mode", "Station No.", "Send waiting time",
"Terminator setting" and "Terminator judgement time" are available in the
FPWINGR.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Permissible range for
AFPCCET1
MEWTOCOL-COM
MEWTOCOL-7
General-purpose Communication
1to99 (MEWTOCOL-COM)
1to999 (MEWTOCOL7-COM)
230400 bps
8bits
ODD
1bits
N/A
0-100ms
CR / CR+LF / Time
0-10000*0.01ms
N/A
Not initialize
4.1 Settings Using FPWIN GR7
Description
Select the mode MEWTOCOL or General-purpose
Communication to match the settings of Configurator
WD.
It is not available for the General-purpose
Communication mode.
These parameters are fixed regardless of the settings in
the FPWINGR7.
CR is fixed for the MEWTOCOL mode.
CR, CR+LF or Time can be selected to match the
settings of Configurator WD.
It is avallable, if terminator setting is "Time".
Set the time to match the settings of Configurator WD.
These parameters are fixed regardless of the settings in
the FPWINGR7.
Advertisement
Table of Contents
