Diagnostics Screen; Operations Screen (Secondary Cabinet); Diagnostic Tests - HP StorageWorks ESL E-Series User Manual

To view or manage the operations information, use the Up and Down buttons to highlight the section
and press Select.
• To toggle the cabinet between online and offline, use the Up and Down arrows to highlight
Cabinet, then press Select. Use the Up and Down arrows to choose Online or Offline, then
press Select.
• To view the CLM firmware revision number, use the Up and Down arrows to highlight CLM,
then press Select. Use the Up and Down arrows to select Details, then press Select again. The
firmware revision is displayed.
• To display details of each drive, use the Up and Down arrows to highlight Drive #, then press
Select. Use the Up and Down arrows to select Details, then press Select again. Drive details
are displayed.

Diagnostics screen

The Diagnostics screen allows you to perform the following diagnostic tests on the library (see
NOTE:
The library must be off-line to run diagnostic testing.
Table 11 Diagnostic tests
Test
Robotics Self Test
Individual Axis Self Test
Robotics to Home Position
Calibrate Cabinet
Read Cabinet Serial Number
Read Cabinet IEEE Id
Figure 45 Operations screen (secondary cabinet)
Description
Checks for unrestricted motion of the library robotics.
Allows testing repeated motions of each axis for service
debug and verification purposes. When setting up the test
on a CLM library, specify the CLM axis to test.
Calibrates the library robotics and sets it to the bottom of
the library with the optical sensor facing the back.
Checks the position of all panels and columns, checks that
the picker is aligned with the slots.
Verifies that the serial number barcode can be read, then
displays the serial number of the cabinet.
Verifies that the IEEE Id barcode can be read, then
displays the IEEE Id of the cabinet.
10650
HP StorageWorks
Table 11).
67