Viewing Partition (Lock Element Addressing) Information; Viewing And Editing Setup Information; Health Status Screen When No Errors Exist - HP StorageWorks ESL E-Series User Manual

If there are errors, present, they will be listed on the screen.
3.
When you are finished viewing the error information, press Back to return to the Menu screen.
NOTE:
The Health Status information is not saved. When you exit this screen, the information is
gone.

Viewing partition (Lock Element Addressing) information

NOTE:
Although when Lock Element Addressing is enabled, some OCP screens show this as "Partitioned",
this is not the same as HP library partitioning.
To view information on the locked elements:
1. From the Menu screen, use the Up and Down arrows to highlight Partitions, then press Select.
2. From the Partition screen, which says "hpLibrary", press the Down arrow once, then press Select.
3. Use the Back button to return to the home screen.

Viewing and editing setup information

To view or edit the setup information:
1.
From the Menu screen, use the Up and Down arrows to highlight Setup, then press Select.
2. The library prompts you for your password. Enter the 6-digit password and wait for validation.
The response may not be immediate.
NOTE:
The default password is 001122.
The Setup screen displays (see
Figure 36 Health Status screen when no errors exist
Figure 37 and Figure 39).
10496
HP StorageWorks
61