Sdlt 320 And 600 Tape Cartridges; Load Ports And Magazines - HP StorageWorks ESL E-Series User Manual

Tape library
Hide thumbs Also See for StorageWorks ESL E-Series:
Table of Contents

Advertisement

NOTE:
For information on ordering tape cartridges and bar code labels, see the
Libraries Media and Bar Code Labels
information at

SDLT 320 and 600 tape cartridges

NOTE:
In addition to the information provided in this manual, see the documentation provided with your media
for more information.
CAUTION:
SDLT tape drives require special cleaning cartridges and data cartridges formatted specifically for SDLT.
To avoid damage to your tape drive, it is critical to use appropriate cleaning cartridges, and properly
formatted data cartridges. Do not use DLT Tape I, DLT Tape II, DLT Tape III, or DLT Tape IIIXT data
cartridges, or DLT cleaning cartridges with SDLT tape drives.
Make it a practice to visually inspect your tape cartridges when loading or removing them from your tape
library. Taking a few minutes to check the condition of your cartridges will lower the risk of repeated
failures and help ensure uninterrupted backup.
CAUTION:
Always discard damaged tape cartridges. If a defective tape cartridge is loaded into a tape drive it may
damage the drive, potentially requiring drive replacement.
NOTE:
For information on ordering tape cartridges and bar code labels, see the
Libraries Media and Bar Code Labels
information at http://www.hp.com/go/storagemedia.

Load ports and magazines

The load ports are mechanical devices in the front panel of the library that enable you to import or export
tape cartridges to and from the library via three columns of tape cartridge magazines, two magazines
per column, without interrupting library operations. Removable magazines are available for both the left
and right load ports with either SDLT or LTO slots.
There are 2 tape cartridge magazines in the left load port, and 4 in the right (see
tape cartridges in these magazines differs between the SDLT and LTO libraries. To find the number of tape
cartridges for any configuration, use the tables located in
flyer that shipped with your library. You can also access this
http://www.hp.com/go/storagemedia
flyer that shipped with your library. You can also access this
HP StorageWorks Tape
HP StorageWorks Tape
Figure
Library storage locations and slot numbering
HP StorageWorks
7). The number of
21

Advertisement

Table of Contents
loading

Table of Contents