HP StorageWorks ESL E-Series User Manual page 114

Tape library
Hide thumbs Also See for StorageWorks ESL E-Series:
Table of Contents

Advertisement

Sense
ASC
ASCQ
key
2
80
01
2
80
07
2
80
09
2
3B
11
2
3B
12
2
5A
01
3
52
00
00
4
44
11
4
80
4
80
23
4
80
0A
4
80
0F
See
4
81
Table
22
See
4
82
Table
22
See
4
83
Table
22
114
Sense data values
Message name / description
DRIVE CLEAN REQUIRED.
A tape drive requires cleaning.
SYSTEM IS STOPPED
The STOP button on the control panel was pressed. Press the STOP
button again to start the library.
LOGICAL UNIT IS TURNED OFF-LINE
Through the Operations menu on the OCP, bring the library on-line.
MAGAZINE NOT ACCESSIBLE
The tape cartridge magazine can not be accessed.
MAGAZINE NOT PRESENT
The tape cartridge magazine is not present.
OPERATOR MEDIUM REMOVAL REQUEST
Indicates that an element contains a cleaning cartridge that is "used-up"
and the library is unable to export the cleaning cartridge. Manually
unload the tape. The load port door is open, so import/export elements
can not be accessed.
DRIVE REPORTING MEDIA ERROR
The tape drive is indicating that it has detected a problem with the
media.
The tape in question should be removed from the library and
discarded.
Check drive logs for more information.
INTERNAL FAILURE
MOTOR POWER FAILURE
Indicates motor powered off for a reason not otherwise reported. Check
the cabinet controller and the umbilical. Check the 55V LED on the
picker to determine whether this is the motor that failed. Verify that the
doors are closed. Check the door sensors.
BAR CODE SCANNER FAILURE
Bar code scanner has failed. Run the Robotics to Home Position test
from the OCP. Run Calibrate Cabinet Test from the OCP and inventory
the cabinet.
CONFIGURATION SETTINGS CORRUPTED
Reconfigure the library. Run the Calibrate Cabinet Test from the OCP.
LOW POWER ERROR
Check power connections and power supplies.
PICKER HARDWARE FAILURE
Remove any obstructions.
Run the Robotics Self Test from the OCP.
ROTARY HARDWARE FAILURE
Remove any obstructions.
Run the Robotics Self Test from the OCP.
EXTENSION HARDWARE FAILURE
Remove any obstructions.
Run the Robotics Self Test from the OCP.

Advertisement

Table of Contents
loading

Table of Contents