Step4 Setting The Got Wireless Lan - Mitsubishi Electric GOT2000 Series Quick Start Manual

Using the GOT Mobile Function
STEP4
Setting the GOT wireless LAN

STEP4 Setting the GOT wireless LAN

1. Set the IP address of the wireless LAN communication unit
Mount a wireless LAN communication unit on the GOT to connect the GOT to an information device, such
as a tablet. Set the IP address of the connected wireless LAN communication unit.
Click [Common] → [GOT Setup] → [Advanced Setting] → [Wireless LAN Setting].
1
3
5
7
4
2
6
Select [Update the wireless LAN setting].
1
Select [Access Point] to use the wireless LAN
2
communication unit as an access point.
Input an arbitrary name in [SSID].
3
This name will be the name of the wireless LAN
network controlled by GOT.
Input [GOT_LAN] in this example.
Click [I/F Communication Setting].
4
Set the [Wireless LAN] [CHNo.] to [A].
5
Click [Detail Setting].
6
Set the IP address of the wireless LAN
7
communication unit. Click [GOT Wireless LAN
I/F Setting].
Setting the GOT wireless LAN
1
2
3
4
5
6
15