Mitsubishi Electric GOT2000 Series Quick Start Manual page 9

Using the GOT Mobile Function
STEP1
Creating a new project
Using the GOT Mobile Function
STEP1 Creating a new project
This manual explains how to access the GOT from a tablet using the GOT Mobile function and display the
mobile screen.
Only the basic operations are covered in this manual. Refer to the following manuals for details on other
functions and settings.
GT Designer3 (GOT2000) Help
1. Creating a new project
Start up GT Designer3 (GOT2000), and follow the wizard to complete the settings.
The setting details and setting values are listed below.
Setting screen or setting item
Selecting project
System settings
Controller settings
Screen switching
Check the details set with the wizard, and then click the [Finish] button.
The GT Designer3 (GOT2000) edit screen will open, and the base screen 1 will be created.
Setting contents
[New], [Open] [New]
[Series] GOT2000
[Type] GT27**-V(640×480)
[Use the gesture function] Selected
[Standard Language] [English]
[Alphanumeric/Kana]: Selected
[Outline Font] [Kanji]: Selected
[Hangul]: Not selected
[Manufacturer] [MITSUBISHI]
[Controller Type] [MELSEC iQ-R, RnMT]
[I/F] [Standard I/F (Ethernet): Multi]
[Ethernet (MELSEC), Q17nNC,
[Driver]
CRnD-700, Gateway]
Set according to the GOT and PLC
[Detail Setting]
connection configuration.
[Base Screen] [GD100] (default value)
Setting value
Select GT27 or GT25.
GT27 only
Set according to the connected
device.
Creating a new project
3
Remarks
-
-
-
-
-
-
-
-
-
-
9