Table of Contents
Advertisement
The CADET PRO (non-handed) Opener is a complete swinging door solution for push or pull surface applied installations. The header
contains the driving system (motor), torque production (gearbox), and a control system to interlink the two.
The CADET PRO Opener ensures all-around safety. It can be combined with the full range of safety units, such as presence and motion
sensors. It is easy to install for both new construction and retrofit application and can be adapted to a wide range of overhead concealed
or surface applied installations.
Safety Precautions
Do not climb or put weight on any door or header parts
Do not let children play with the opener or the electrical board
Keep remote controls away from children
Keep all power off to the unit, when performing any work or maintenance
To avoid bodily injury, material damage and malfunction of the product, the instructions contained in this manual must be strictly observed
during installation, adjustment, repairs, and service, etc. Training is needed to carry out these tasks safely. Only trained technicians
should be allowed to carry out these operations.
Handing Information
The handing and types of each opener are shown in the figure below.
3.0 INTENDED USE
Page 5 of 31
WebDoor
info@webdoor.com
www.webdoor.com
Issued Date: 2017-03-28
Advertisement
Table of Contents
