Table of Contents
Advertisement
6.2.2 Changing Left To Right Push/Pull By Turning Opener Upside Down
Left Hand Push
Note: Must have the appropriate arm to complete transition.
Before you begin, note that direction of the open/back check arrow will indicate the direction the unit will open when activated. As
mentioned in section 6.2.1, if the opener label is facing down towards the floor, then the handing is left hand push/pull. If the
opener label is facing up towards the ceiling, the handing is right hand push/pull.
Direction of spindle
rotation (To Open Door)
Steps
1.
Remove gear box assembly from mounting plate.
2.
Disconnect wire harnesses and switch wiring from control (see wiring).
3.
Re-attach gear box to opposite side of mounting plate and rotate mounting plate. Note that the arrow is now pointing upward.
This indicates the handling is left hand pull.
4.
Connect wire harness and switch wiring (see wiring).
5.
Fully tighten all bolts.
Page 11 of 31
WebDoor
info@webdoor.com
www.webdoor.com
Issued Date: 2017-03-28
Right Hand Push
Advertisement
Table of Contents
