Returning The Watch To Its Factory Default Settings; Changing The Home City Summer Time Setting; Checking The Watch Charge Level; Connection - Casio Edifice EQB-900DB-2AER Operation Manual

Returning the Watch to Its
Factory Default Settings
Using CASIO WATCH+ to reset the watch
returns to the settings below.
Stopwatch elapsed time: 0 hours, 0
●
minutes, 0 seconds
Countdown Timer time: 0 hours, 10 minutes
●
Alarm
●
Alarm time: 12:00 midnight
—
Alarm setting: Off
—
Mute setting: Off
●
Connection time: 3 minutes
●
Auto adjust: Off
●
1.
X Pull out the crown to the second click.
2.
X Hold down (C) for about five seconds.
Resetting watch settings causes the
second hand to move to 12 o'clock.
Second hand
3. Push the crown back in.
Changing the Home City
Summer Time Setting
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Perform the operation shown on the
phone screen to change the summer time
setting.
Operation Guide 5560
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCH+.
1.
Y On the Home Screen, tap the "CASIO
WATCH+" icon.
2.
X Hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
3.
Y Use CASIO WATCH+ to check the
charge level.

Connection

Connecting with a Phone

This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, perform the procedure
under "C Pair the watch with a
pair them.
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
e, hold down (C) for about two seconds.
The second hand will move to [R]. Keep
●
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
The second hand will move from [R] to
●
e when a connection is established
between the watch and phone.
Important!
The watch cannot connect with a
●
phone while a stopwatch time
measurement or timer countdown
operation is in progress.
If you have problems establishing a
●
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone's home
screen, tap the "CASIO WATCH+"
icon. After the app starts up, hold
down the watch's (C) button for
about two seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with:
use CASIO WATCH+ to select
"Watch settings" n "Connection
time", and then specify a setting of 3
minutes, 5 minutes, or 10 minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected
phone." to
After disconnection
9