Lenovo ThinkStation P920 Hardware Maintenance Manual page 205

Notes:
• Be careful when you pull the cables through the holes.
• The cable routing varies depending on whether the blind-connect assembly is installed in the
upper storage drive bay or the lower storage drive bay. Record the cable routing method before
pulling out the cables. When you install the new blind-connect assembly afterward, route the
cables in the same way according to your record.
6. To install a blind-connect assembly, do the following:
a. For an optional storage drive bay, remove the storage-drive-bay cover.
Figure 173. Removing the storage-drive-bay cover
.
Chapter 9 Hardware removal and installation
197