Pcie Card - Lenovo ThinkStation P920 Hardware Maintenance Manual

Dual-processor workstation
Hide thumbs Also See for ThinkStation P920:
Table of Contents

Advertisement

b. Position the new memory module over the memory slot. Ensure that the notch
module aligns correctly with the slot key
down into the slot until the retaining clips close.
Note: Do not touch the circuit board of the memory module.
Figure 105. Installing the memory module
c. Reinstall the direct cooling air baffle. See "Direct cooling air baffle" on page 107.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 210.

PCIe card

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Your computer has the following PCIe card slots:
• PCIe 3.0 x4 card slots
• PCIe 3.0 x16 card slots
Notes:
• PCIe cards available vary by computer model.
• To remove or install a full-length PCIe card, see "Full-length PCIe card" on page 163.
• If you want to use an NVIDIA compute card, ensure that your computer also has an NVIDIA graphics card
installed.
PCIe card installation rules
Install PCIe cards in the alphabetic order as shown.
2
on the system board. Push the memory module straight
Chapter 9
1
on the memory
.
Hardware removal and installation
155

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents