Lenovo ThinkStation P920 Hardware Maintenance Manual page 172

Figure 118. PCIe card installation order for computers with one microprocessor
Figure 119. PCIe card installation order for computers with two microprocessors
To remove or install a full-length PCIe card, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 103.
2. Lay the computer on its side for easier access to the PCIe card slots.
3. Locate the PCIe card slot. See "Parts on the system board" on page 38.
4. If necessary, remove the direct cooling air baffle for easier operation. See "Direct cooling air baffle" on
page 107.
5. To remove a full-length PCIe card, do the following:
164
P920 Hardware Maintenance Manual