Lenovo ThinkStation P920 Hardware Maintenance Manual page 195

Figure 152. Removing the card reader in the flex module
b. Flex the four clips on the sides of the card reader retaining bracket to remove the card reader from
the bracket.
Figure 153. Removing the card reader from the card reader retaining bracket
6. To install a card reader, do the following:
a. To install a new card reader into the card reader retaining bracket, align the four holes in the card
reader with the corresponding studs on the bracket. Then, press the new card reader downward until
it snaps into position.
Figure 154. Installing the card reader into the card reader retaining bracket
b. Note the orientation of the new card reader and route the card reader cable into the cable clip. Hold
the clip on the card reader retaining bracket. Then, insert the new card reader into the card reader
slot in flex module until it snaps into position.
.
Chapter 9 Hardware removal and installation
187