Lenovo ThinkStation P920 Hardware Maintenance Manual page 118

• Front-access storage enclosure
• Multi-drive conversion kit
• Optical drive
• Slim-optical-drive adapter
Note: The following instructions on how to remove or install an optical drive also apply to other supported
devices in the flex bay.
To remove or install an optical drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 103.
2. Remove the direct cooling air baffle. See "Direct cooling air baffle" on page 107.
3. Locate the flex bay. See "Internal storage drives" on page 40.
4. To remove an optical drive, do the following:
a. Disconnect the cables from the optical drive.
Note: If you are removing other supported devices from the flex bay, disconnect any additional
cables.
b. Press the tab 1
optical drive from the front of the chassis.
Figure 18. Removing the optical drive
5. To install an optical drive, do the following:
110
P920 Hardware Maintenance Manual
downward and push the optical drive to the front of the chassis. Then, remove the