Service manual
Servicing the insert module
The insert module consists of some small modules and
assemblies. See figure 15.
The insert module is assembled in different
configurations which is why the construction can vary
accordingly.
Usually, the construction contains the assembly parts
as in figure 15. Some configurations do not include
diffusers and glare shield. The light engine can be one
of these models: 400, 410 or 420.
Diffuser.
Glare shield.
Light engine.
Service module.
This assembly contains the frame, main PCBA, mains
filter and fan.
Figure 15: Fixture insert module
Exterior Inground 400 LED - Revision B, 08-18-2017
10 of 18