Altronix AL1024ULX Installation Manual page 3

15 min. of Stand-by
Output
and 5 min. of Alarm
24VDC/12AH Stand-By = 8A
Battery
15 min. of Stand-by
Output
and 5 min. of Alarm
24VDC/65AH
Battery
For Access Control applications, battery capacity for 10A supply current - 1 hr. for 24VDC/12AH battery,
6.5 hrs. for 24VDC/65AH battery.
See battery size calculation worksheet for other batteries (Page 7).
Fig. 1
CAUTION: De-energize unit prior to servicing. For continued protection
against risk of electric shock and fire hazard replace fuses with the same type
and rating. Do not expose to rain or moisture.
Wire Strap
(from
Enclosure
to Door)
AL1024ULX Series
Stand-by Specifications (total current shown):
and 5 min. of Alarm
Alarm = 10A
4 hr. of Stand-by and
–
115VAC
power mains
non power-limited
L
Earth Ground
Optional Rechargeable
Stand-by Battery
CAUTION: Optional rechargeable stand-by batteries must match
the power supply output voltage setting.
Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing.
4 hr. of Stand-by
Stand-By = 1.5A
Alarm = 10A
5 min. of Alarm and 15 min. of Alarm
Stand-By = 8.0A
Alarm = 10A
Battery and AC
Supervision Circuit
(power limited).
G N
BAT FAIL NC C NO NC C NO AC FAIL
Class 1
Power
Distribution
Module(s)
24 hr. of Stand-by
and 5 min. of Alarm
Stand-By = 200mA
Alarm = 10A
24 hr. of Stand-by
Stand-By = 1.5A
Alarm = 10A
non power-limited
15
Battery Connections
AC DC
non power-limited
AC DELAY
Divider
1 2
INPUT
Optional Rechargeable
Stand-by Battery
60 hr. of Stand-by
and 5 min. of Alarm
Stand-By = 100mA
Alarm = 10A
60 hr. of Stand-by
and 15 min. of Alarm
Stand-By = 500mA
Alarm = 10A
- 3 -