2.11.4
ATX Soft Power Switch (JFP1 pins 1 & 3)
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to pins 1 and 3 of JFP1. This connection
enables you to turn your computer on and off.
2.11.5
Reset Connector (JFP1 pins 2 & 4)
Many computer cases offer the convenience of a reset button.
2.12
8-pin Alarm Board Connector (VOLT1)
VOLT1
VOLT1 connects to the alarm board of Advantech chassis. These alarm boards give
warnings if a power supply or fan fails, if the chassis overheats.
2
4
21
ASMB-782 User Manual