1.8.1.3
Watchdog timer output (JWDT1)
The ASMB-782 contains a watchdog timer that will reset the CPU. This feature
means the ASMB-782 will recover from a software failure or an EMI problem. The
JWDT1 jumper settings control the outcome of what the computer will do in the event
the watchdog timer is tripped.
Table 1.5: Watchdog timer output (JWDT1)
Function
*Reset
NC
* default setting
Note!
The interrupt output of the watchdog timer is a low level signal. It will be
held low until the watchdog timer is reset.
1.8.1.4
Deep Sx Mode (JGREEN1)
The ASMB-782 contains a jumper that can support energy saving for BIOS deep Sx
feature. Normally this jumper should be set with pin 1-2 closed. If you want to disable,
set JGREEN1 to 2-3 closed for disable.
Table 1.6: Deep Sx Mode (JGREEN1)
Function
*Enable
Disable
Jumper Setting
1
2
3
1-2 closed
1
2
3
2-3 closed
Jumper Setting
1
2
3
1-2 closed
1
2
3
2-3 closed
9
ASMB-782 User Manual