Table of Contents
Advertisement
1.9
System Memory
ASMB-782 has four 240-pin memory sockets for DDR3 ECC/Non-ECC 1066/1333/
1600 MHz memory modules with maximum capacity of 32GB (Maximum 8GB for
each DIMM).
Please note that both versions ASMB-782 do NOT support registered DIMMs
(RDIMMs).
1.10
Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
"open" position. i.e. The handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket, and then press the DIMM module right
down into the socket, until you hear a click. This is when the two handles have auto-
matically locked the memory module into the correct position of the DIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
1.11
Cache Memory
The ASMB-782 supports a CPU with one of the following built-in full speed L3
caches:
The built-in third-level cache in the processor yields much higher performance than
conventional external cache memories.
8 MB for 3rd Generation Intel Xeon E3-1275 V2 CPU
8 MB for 3rd Generation Intel Xeon-E3-1225 V2 CPU
3 MB for 3rd Generation Intel Core i3-3220 CPU
3 MB for Intel Pentium G2120 CPU
8 MB for 2nd Generation Intel Xeon E3-1275 CPU
6 MB for 2nd Generation Intel Xeon-E3-1225 CPU
3 MB for 2nd Generation Intel Core i3-2120 CPU
3 MB for Intel Pentium G850 CPU
11
ASMB-782 User Manual
Advertisement
Table of Contents
